澳洲幸运10开奖直播下载

Kydex® 200 General Purpose – Kydex 200 is a proprietary acrylic/PVC thermoplastic sheet that is cost competitive with other thermoplastics while providing excellent extensibility, good impact resistance, and excellent solvent resistance. It is available in limited colors and with higher minimums than Kydex 100 or Kydex T. Based on independent laboratory testing it meets the requirements of UL Std 94 V-0 in all gauges. It has 10 ft-lbs/in (534 J/m) of Notched Izod impact resistance.

SUGGESTED USES
Kydex 200 can be used to substitute effectively for both general purpose ABS and acrylic/PVC thermoplastics. Examples include: data processing equipment housings, photocopy machines, vending machine chutes, and consumer products.

FEATURES
• Kydex 200 is available in seven gauges from .028″ (.71mm) and up in eight distinctive textures and limited colors.
• Delivers performance advantages at an effective cost.

It is among the most rigid of thermoforming materials as demonstrated by its high modulus of elasticity. Particularly effective for pressure forming and/or where the part is going to be painted.
Meets the requirements of 94 V-0 in all gauges as tested by an independent lab.

FABRICATION
Excellent forming properties result in uniform wall thicknesses and crisp detail, plus easy machining and fabricating using conventional methods, further expanding finished part possibilities.

PROPERTY TEST METHOD TYPICAL VALUE1
Specific Gravity ASTM D-792 1.35
Tensile Strength, psi (MPa) ASTM D-638 6,100 (42)
Elongation at Break, % 80
Flexural Strength, psi (MPa) ASTM D-790 9,100 (63)
Modulus of Elasticity, psi (MPa) 320,000 (2206)
Rockwell Hardness, R ASTM D-785 94
Notched Izod Impact Resistance, 73°F (23°C),ft-lbs/in (J/m) ASTM D-256 10 (534)
Heat Deflection Temperature, HDT, @264psi (1.8 MPa), annealed,°F (°C) ASTM D-648 173° (78°)
Independant Test Lab2 UL Standard 94 V-0
Radiant Panel Flame Spread Index (ls) ASTM E-162 <35
Forming Temperature F (C) 325°-390°
(163°-200°)
Mold Shrinkage, % 0.4 – 0.6
1All values based on 0.125″ (3.12mm) sheet unless otherwise specified.
2All gauges from 0.028″ (.71mm) and greater. Not  intended for specification purposes.
[ ]    Welcome to Norva Plastics

Norva Plastics has been a full-service plastics fabricator and supplier of plastic materials. With over half a century in the business, we can tackle just about any job with confidence that comes from experience. From a tough prototype to long-run production, whatever your requirement, contact the experienced plastics fabricators first at Norva Plastics.

Norva Plastics provides many services relating to plastics and similar materials. We have 3 high precision CNC machines in house to handle high production jobs or for quick prototype jobs. We also do custom fabrication and also offer vacuum forming services. So contact us now! We look forward to serving you.

澳洲幸运5计划软件 SG赛车结果 SG赛车3期计划 澳洲幸运10在线计划 澳洲幸运10群 澳洲10投注平台 秒速飞艇在线走势图 澳洲幸运5开奖结果软件